- Licensed & Insured
- 20+ Years Experience
- Fast Response
- Stillwater, MN
You need a secure and functional service mast to safely bring electricity from the utility lines into your home. Erick Marshall Electric provides professional mast repair services for electrical masts in Stillwater, Minnesota, and nearby areas. The service mast is the vertical pipe that carries power lines down to your meter. When this mast is bent, pulled away from your siding, or broken by a fallen tree branch, your home is at risk. We specialize in repairing and replacing damaged masts to ensure your connection to the power grid remains stable and in compliance with all safety codes. Our team works quickly to get your equipment ready for the utility company to restore your power.
651-426-3889
Stillwater, Minnesota & East Metro Area
24 hours / 7 days a week
The service mast acts as the entry point for electricity into your property. It must be strong enough to support the weight of the heavy overhead wires and withstand the tension caused by high winds. In many Stillwater neighborhoods with overhead power lines, the mast sits on the roof or the side of the house. If the mast is compromised, it can expose live wires or cause structural damage to your roof.
We ensure that your mast is mounted with the correct heavy-duty brackets and bolts. A sturdy mast prevents the power lines from sagging or pulling the electrical box off your wall. Our electricians understand the specific height and clearance requirements set by Minnesota state laws. We make sure your mast is tall enough to keep the wires at a safe distance from your roof and driveway.
Minnesota storms are the most common cause of mast failure. When a tree limb falls on the service drop wires, the force is often enough to snap or bend the metal pipe. You might notice the mast leaning at an angle or see that it has pulled away from your home’s exterior. This is a dangerous situation because it can create a gap where water can enter your electrical system.
We provide emergency repairs for storm-damaged masts to prevent further issues. We replace bent pipes, broken insulator porcelain, and damaged weather heads. The weatherhead is the cap at the top of the mast that prevents rainwater from running down the pipe and into your meter socket. Our team uses weather-proof materials that keep your electrical system dry and safe from the elements.
If you are upgrading your home to a 200-amp electrical panel, you likely need a larger service mast as well. Older masts were often made of smaller diameter pipes that could not accommodate the thicker wires needed for modern power loads. We install new, high-capacity masts that provide the room and protection your updated system requires.
Upgrading your mast at the same time as your panel ensures your entire system meets current standards. We make sure the new mast is placed in a location that provides the best path for the utility lines. Our electricians handle the technical details of the installation to ensure the pipe is properly grounded. This professional approach protects your home from electrical surges and ensures your new panel works at peak efficiency.
Sometimes a service mast does not break completely but becomes loose over time. This can happen due to house settling or constant wind vibration. A loose mast can vibrate against your siding and cause damage to your home’s exterior. It also puts unnecessary stress on the wires inside the pipe.
We tighten or replace the mounting brackets to ensure your mast stays rock-solid. If the mast has pulled away and caused a hole in your siding or roof, we work to secure the equipment so your home is protected from leaks. We check the flashing and seals around the base of the mast to ensure a watertight fit. Keeping your mast securely attached is a simple way to avoid major electrical and structural repairs in the future.
Repairing a service mast is a job that involves more than just the homeowner. Because the mast connects directly to the utility grid, the power company must be involved to disconnect and reconnect the service lines. We manage this coordination for you to make the process as smooth as possible.
Once our repairs are finished, we help arrange the necessary inspections with the City of Stillwater or the local building department. The utility company will not reconnect your power until a licensed electrician has certified that the mast is safe. We provide the professional documentation and high-quality work needed to pass these inspections the first time. Our goal is to minimize your downtime and get your lights back on without any extra stress.
Working with a local Stillwater electrician means you get someone who knows the specific weather challenges of our region. We take pride in our craft and always leave our workspace clean so you can get back to your daily routine.
